A customer asked for a dryer vent for their sailboat. They needed something that would attach to the frame of a portlight that was near the dryer, but the needed something that was easily removed and stowed when they wanted to get underway. We fabricated a beautiful vent out of […]
Custom yachts require custom fixtures. We carved this shower pan to fit and existing floor plan and drain location for a yacht the is undergoing an extensive refit. We did in 2 hours what would have taken a typical carpenter hours of sanding and fitting to accomplish. Our capabilities are […]
We were recently contacted about making custom aluminum electrical panels for yachts. Typically this type of work would be done by water-jet, but the specs call for a 1/32″ rebate for a label. In addition to the rebate we will also be milling countersinks for the fasteners.
A big hit with the pilot and boater crowd, as well as adventurers, we’ve come up with a new twist on the typical address plaque for your house. Why not your latitude and longitude!
I produced this inlay work as a test piece for a local carpenter. The limitation of producing inlays with a CNC machine has always been the rounded corners left by a round cutting tool. Using a new technique that takes advantage of the sharp corners of the V-carve capabilities and […]
We carve custom name boards for yachts. This set of boards came from one of the local ships carpenters that we collaborate with. We received them shaped and masked. We carved the name with a V-carve bit, which leaves nice crisp edges and sharp corners in the letters. […]